Basic Flow Of Water Purifier Installation
The installation process of the water purifier mainly includes the following steps.
The first step is to turn off the water. Turn off the main water valve in your home,
turn on the faucet, and drain the remaining water in the pipe to prevent water leakage during installation.
The second step is to install the inlet and outlet pipes. According to the instructions in the manual,
connect the water inlet pipe to the water purifier inlet, and the water outlet pipe
to the water purifier outlet. When connecting, ensure that the connection
is tight without water leakage, and the raw material belt can be properly sealed.
The third step is to install the filter. If the water purifier is equipped with a pre-filter, install it
on the main water line for the initial filtration of large particulate impurities in the water.
Then according to the instructions, install the main filter into the water purifier, and use accessories
Water Purifier Factory, Water Purifier For Home, Water Purifier Machine, Water Purifier, Water Filter Purifier System
to fix the filter to prevent it from moving or falling off during use.
The fourth step is to install the water purifier body. Install the water purifier body in the pre-selected
position to ensure stability. If wall mounting is required, attach the water purifier to the wall using a suitable hook or bracket.
Finally, the water inlet pipe, the water outlet pipe and the water purifier are connected,
and the connection points are checked again to avoid water leakage.
Basic Flow Of Water Purifier Installation
