Debugging And Inspection Of Water Purifier After Installation
The installation of the water purifier is not complete,
and debugging and inspection are the key links to ensure its normal operation.
First of all, check the connection of the water purifier components.
Look carefully at each pipe connection point to ensure that the pipe fittings are tightly connected
and there are no signs of loosening. Gently shake the main body of the water purifier to ensure that the
internal filter element is firmly installed without displacement or abnormal sound.
If it is found that the connection is not strong, reconnect it immediately to prevent water leakage and other problems in subsequent use.
Next, the water test is carried out. Slowly open the inlet valve and let the water gradually flow into the water purifier.
At this time, pay close attention to whether there is water seepage and water leakage at each connection.
As soon as you notice a leak, turn off the water and investigate the cause carefully.
The sealing gasket may not be installed in place, or the pipe is not tightly connected, and it needs to be reinstalled or adjusted accordingly.
Then, rinse the filter element. When used for the first time, it is necessary to wash the filter element
to remove the impurities remaining during production and transportation. Follow the instructions,
turn on the faucet and let the water flow continuously for a period of time. During this period,
Water Purifier Factory, Water Purifier For Home, Water Purifier Machine, Water Purifier, Water Filter Purifier System
the water may be observed to be slightly colored or have tiny particles, which is normal.
Finally, test the water quality. After the rinse is complete, use professional water quality testing tools,
such as TDS pens, to test the purified water. The detection value is compared with the original value of local tap water,
if the value is significantly reduced, and in line with the standard range of water purifier products,
it indicates that the water purifier is working normally. If the value is abnormal,
it is necessary to further check whether the filter element is installed correctly or whether there is a quality problem with the filter element.
Debugging And Inspection Of Water Purifier After Installation
