The Use Of The Water Purifier Is as Follows

The Use Of The Water Purifier Is as Follows

First use:
Rinse: Open the tap, tap water inlet ball valve, clean the faucet, rinse for about 15 minutes until the water is clear and frothy. During the flushing process, the faucet can be turned on and off frequently (off for 3 seconds, on for 10 seconds) to form a pulsating impact and enhance the flushing effect.

Make water: turn off the sewage faucet, open the purification faucet, make water 5 minutes after normal use.
Daily use:
Flush: After taking the purified water, it is recommended to open the tap water to rinse it, wash away the trapped pollutants in time, maintain the water flux of the water purifier, and extend the service life.
Select mode (if any) : Some water purifiers provide different filtration modes, such as pure water, mineral water, etc., can be selected according to needs.

Maintenance:
Regular replacement of the filter element: according to the frequency of use and water quality, regular inspection and replacement of the filter element, generally every 3 months to 1 year replacement, specific reference to the manual.
Regular cleaning: Clean the water purifier shell and water outlet regularly to prevent bacterial growth. However, avoid using strong acid or alkali cleaning agents when cleaning, so as not to damage the equipment.

Handling of special cases:
After the water is cut off: if the tap water is cut off, open the sewage faucet first to drain the sediment and rust in the tap water pipe, and then use the water purifier.

After a long time out of use: more than three days do not use the water purifier, when used again should be repeatedly flushed 2-5 minutes, until the water purifier memory drained.

The Use Of The Water Purifier Is as Follows