Water Purifier Installation Common Problems And Solutions
In the process of water purifier installation, there are often various problems,
and it is very important to master the corresponding solutions.
Water leakage: This is the most common problem. Leakage at the joint may
be due to improper installation or damage to the seal. Reinstall the seal or replace it with a new one if it is damaged.
For example, insufficient or uneven winding of the raw material belt will lead to water seepage of the interface,
which should be re-wound to ensure a good seal. If the water pipe is broken,
replace the water pipe with a new one. During installation, avoid excessive bending and squeezing of water pipes to prevent potential breakage.
No water or small water output: no water, first check whether the inlet valve is fully opened,
if not opened, open it. If the valve is open, the filter element may be blocked. The newly installed water purifier may have impurities
in the filter element and need to be washed for a period of time. Long-term use of water purifier, filter element to reach the service life,
should be replaced in time. The water output is small, in addition to the reason for the blockage of the filter element,
the water pressure may also be too low. The booster pump can be installed to increase the water pressure to meet the normal working requirements of the water purifier.
Water purifier operation noise: if the installation of the water purifier is not stable, the operation will produce a large noise.
It needs to be repositioned to ensure it sits smoothly on a solid surface. In addition, the failure of the pump will also cause abnormal noise.
In this case, contact professional maintenance personnel to repair or replace the pump.
Poor water purification effect: it may be that the filter element is installed incorrectly or the model does not match. It should
Water Purifier Factory, Water Purifier For Home, Water Purifier Machine, Water Purifier, Water Filter Purifier System
be re-installed according to the instructions to ensure the correct installation of the filter element. If the filter type does not match,
replace the appropriate filter. At the same time, if the raw water quality is too poor to exceed the load of the water purifier,
it will also affect the purification effect, and you can consider increasing the pre-filtration equipment.
Water Purifier Installation Common Problems And Solutions
